Products



Home Contact Us IRS Build Up 80 - 82 6-Link Install Our Products Customer Feedback Garage Sale		Improve your rear suspension geometry on your Corvette! The Basic Drag Kit was featured in "Corvette Fever" and acclaimed as "wickedly consistent". This is a street / strip package for Corvette enthusiast on a budget. It will; improve standing start traction, reduce breakage through better geometry, and improve tire wear. The Dragvette suspension package improves handling on the street. I drove this system for thousands of miles personally and developed it at the race track because of parts breakage. How many street Corvettes have you seen that blasted 1.45 sixty foot time with out spewing their parts all over the track! The Basic Dragvette Kit includes alignment instructions, and a help line with a knowledgeable drag racer plus the quality parts pictured on the left. Four 3/8 x 1 3/4 Hex head screws with lock washers are also included in the Basic Drag Kit. Basic Drag Kit 63-82___$249.95 Basic Drag Kit
	Dragvette 6-Link System 63-82 63-67 Corvettes______ $945.00 68-82 Corvettes______ $895.00 63-79 with Tom's____$1,045.00 80-82 Corvettes______$895.00	Dragvette developed a project car to install and test our 6- link suspension system. The 1973's development is posted on this site. Click the hyper link on the left side of the page named "6-Link Suspension" to see how it all happened. Follow the early development of the Dragvette 6-Link Suspension System and the innovations to accommodate various after market modifications like dual mount mono-springs and Tom's Differential items. There is a separate model 6-Link for the 80 - 82 Corvettes click on that link for several pictures and the installation instructions for your special year Corvettes. Why order the " Dragvette 6-Link Suspension System" The Dragvette 6-Link suspension system will positions the tire perfectly vertical to the road this gives you better traction with a larger tire contact area. It also results in even tire wear and longer lasting tires. The 6-Link has a top strut bar link. If your half shaft goes away your Corvette will not let the tire go into the body of the wheel well and stop the wheel from turning the tire. The Dragvette 6-Link will keep your Corvette standing tall. (rear cover is not included )
		The stock Corvette rear suspension is known for it's self destructive tendencies. The NHRA requires a drive shaft safety loop on all cars running 13.99 (8.14 eighth) and quicker. The exception is cars running 13.00 (8.14 eighth) with street tires. This is on page 23 of the NHRA 2008 rule book under DRIVE LINE. On the same page listed under REAR END the rules state the 1963 to 1982 Corvette with IRS are required to have a 1/4 x 1",360 degree axle retention loop on each axle. Our Safety Loops meet their specifications and have been track tested. We are pleased to be the only supplier of Corvette safety loops at the price of $119.00 a pr. The Safety loops are painted flat black and ready for installation. Hardware includes grade 8 jam nuts and lock tight. We have Safety loops for 1963 to 1982 1963-82 Corvette Half Shaft Safety Loops $119.00 pair.
		DragVette "Half Shaft Safety Loop" for the 1984 to 1996 model Corvettes. Corvette year and rear end type Dana 36 or Dana 44 must be specified because of several variations. This safety loop meets the NHRA specifications and will give you peace of mind while limiting the pucker factor if something comes loose. This unit is $139.00 plus shipping with free handling, a 3/16" hex wrench is included for installation purposes. Order by phone toll free at 877-422-0943 or 260-492-7396. WE accept most major credit cards. See our products page for the 1984-96 split safety loop for easy installation. 1984-96 Safety loops solid______$139.00 Pair
		Here is a bolt on Drive shaft safety loop that can be purchased though us to go with your Half Shaft Safety loops below. It fits the 84-96 Corvettes Exotic Muscle Drive shaft Safety Loop $89.00.
		"Half Shaft Safety Loops" for the 84 to 96 model Corvettes. There are available in a solid style that requires removal of the half shaft to install for $139.00. The two piece safety loop shown to the left doesn't require the removal of the drive shaft or dropping the strut arms. The installation doesn't get easier than this one. The split half shaft safety loops are $179.00 a pair. The picture to the left illustrates a pair of DragVette Safety Loop installed on an 1984 to 1996 Corvette rear cover $139.00 to 179.00 depending on style, solid or split. 1984-96 Safety Loops Split__$179.00 Pr.
		Our "Drive Shaft Safety Loop" fits1969 to 1979 Corvettes. Our drive shaft safety loop bolts into existing holes in the the cross member making installation a snap. The basis unit is priced at $98.00 it will accommodate Turbo 350s, 400s, the 200r4 and Power Glides. The extended version will accommodate the 700R4 and is required by most longer manual transmissions. It is priced at $149.00. Do you think a safety loop mounted to your floor will keep the drive shaft out of your seat? I know of more than one occasion the drive shaft has come up through the floor. Drive Shaft Safety Loop_______$98.00 to $149.00
		For 1963 to 67 Corvettes without existing holes. You don't want to drill any holes in your classic so we came up with these u-straps to secure the drive shaft safety loop over the cross member frame. 1963-67 Drive Shaft Safety Loop_____ $98.00
		This is a Drive Shaft Safety Loop for the 1980-82 Corvettes. It is so tight under these cars and nothing is straight. Our design requires five 3/8 X 1" body screws to hold this loop in place. There is also a little trimming required on the heat shield. This is the only Drive Shaft Safety Loop on the market that we know of for the 80-82 Corvettes. 1980-82 Drive Shaft Safety Loop $89.00
		These brand new 3" Dia. half shafts fit 1963 to 1979 Corvettes. priced at $379.00 a pair. They arrive as pictured with solid Spicer universals and flanges. The 63 to 79 are in stock. 3" Heavy Duty Half Shafts__$379.00 a Pair
		3" Dia. half shafts for 1980 to 82 Corvettes are available. These are built when ordered and priced at $379.00. Complete with 1350 solid Spicer universals that will bolt into the manual side yoke and wheel flange. The 80 to 82 half shaft do not include a flange as pictured. 3" Heavy Duty Half Shafts__$379.00 a Pair
		The heavy duty rear cover is a great and low priced up grade for the 63-79 Corvette. The red unit is a heavy duty and the black unit is stock. Look at the difference in the u shaped part of the webbing on the casting. The heavy duty cover we supply is 6 -7 pounds heavier then the stock unit. That's a lot of beef where it is needed on the high horsepower Corvettes of today. Muskegon Brake Heavy duty Cover___ $109.00
		Dragvette billet caps are the best replacement for your u-straps on the side yokes of your Corvette. Made from 1018 C.R.S. and zinc plated for rust prevention these billet caps will look good and hold better then the stock units. The stock units torque is 15-17 ft. lbs. Our billet caps are to be set at 30 - 32 ft. lbs. The reason you can do this is because the edge of the bearing cap is solid and our billet caps pull down on the edge of the bearing cap and do no distort the bearing cap like the stock style u-bolt does. Order the long bolt style for replacing u-bolt style clamps and if you are replacing so old pitted unit with the threaded style side yoke order the short bolt kit. 4 billet caps in a set ______$109.00
		These aluminum discs will help stabilize your differential cross member. Increasing stability will help with consistent 60 foot times if things are a little wobble back there. They look high tech and are made out of light weight Aluminum. Aluminum Cross Member Stabilizers___$39.95
		Hear is another product for stabilizing your rear cross member. Removal of the cross member is required in order to install these items. If you are doing a some heavy wrenching anyway now would be a good time to install this low dollar up grade. Cross Member Tabs____________$11.95